Copper core, XLPE insulated, PE sheathed power cable

YJV 8.7/15（17.5）kV

Structure: copper conductor/XLPE insulation/PVC outer sheath
Rated voltage: 8.7/10kv
Type：YJV
To implement the standards Applicable Standards:
National standard: gb/t12706.1-2008
International Standard: International: IEC60502-1
Additional Standard: GB/T 19666-2005 General Rules for Flame Retardant and Refractory Cables
Scope of application: Transmission and distribution lines with rated voltage Uo/U of 0.6/1KV and below at 50 Hz

产品描述
parameter
Specifications
Describe
Features
Others

- Commodity name: Copper core, XLPE insulated, PE sheathed power cable
YJV 8.7/15（17.5）kV

Structure: copper conductor/XLPE insulation/PVC outer sheath
Rated voltage: 8.7/10kv
Type：YJV
To implement the standards Applicable Standards:
National standard: gb/t12706.1-2008
International Standard: International: IEC60502-1
Additional Standard: GB/T 19666-2005 General Rules for Flame Retardant and Refractory Cables
Scope of application: Transmission and distribution lines with rated voltage Uo/U of 0.6/1KV and below at 50 Hz

YJV 8.7/10,8.7/15 KV 1 CORES Copper core/ XLPE insulated/ PVC sheathed Cable

导体截面 Cross section	绝缘厚度 Insulation thickness Avg.	近似外径 Outer diameter approx.	最小弯曲半径 Min. bending radius	载流量（空气中） Current ratings in air 30℃	载流量（埋地）Current ratings buried 20℃	20℃最大直流电阻 maximum DC resistance at 20℃	电容 Capacitance	护套颜色 Sheath color	包装方式 Package



（mm2）	（mm）	(mm)	（mm）	(A)	(A)	(Ω/km)	(μF/km)	—	—
25	4.5	21.6	324	165	160	0.73	0.17	Black	Disk pack
35	4.5	22.9	344	205	190	0.52	0.19	Black	Disk pack
50	4.5	24.2	363	245	225	0.39	0.21	Black	Disk pack
70	4.5	26.1	392	305	275	0.27	0.24	Black	Disk pack
95	4.5	27.7	416	370	330	0.19	0.26	Black	Disk pack
120	4.5	29.3	440	430	375	0.15	0.28	Black	Disk pack
150	4.5	30.9	464	490	425	0.12	0.31	Black	Disk pack
185	4.5	32.7	491	560	480	0.1	0.33	Black	Disk pack
240	4.5	35.1	527	665	555	0.08	0.37	Black	Disk pack
300	4.5	37.3	560	765	630	0.06	0.4	Black	Disk pack
400	4.5	41.9	629	890	725	0.05	0.46	Black	Disk pack
500	4.5	45.4	681	1030	825	0.04	0.52	Black	Disk pack
630	4.5	49.1	737	1190	940	0.03	0.56	Black	Disk pack

YJV 8.7/10,8.7/15 KV 3 CORES Copper core/ XLPE insulated/ PVC sheathed Cable

导体截面 Cross section	绝缘厚度 Insulation thickness Avg.	近似外径 Outer diameter approx.	最小弯曲半径 Min. bending radius	载流量（空气中） Current ratings in air 30℃	载流量（埋地）Current ratings buried 20℃	20℃最大直流电阻 maximum DC resistance at 20℃	电容 Capacitance	护套颜色 Sheath color	包装方式 Package



（mm2）	（mm）	(mm)	（mm）	(A)	(A)	(Ω/km)	(μF/km)	—	—
3×25	4.5	45.4	681	123	153	0.73	0.23	Black	Disk pack
3×35	4.5	48	720	148	183	0.52	0.25	Black	Disk pack
3×50	4.5	51	765	178	218	0.39	0.28	Black	Disk pack
3×70	4.5	54.8	822	246	266	0.27	0.3	Black	Disk pack
3×95	4.5	58.5	877.5	267	318	0.19	0.32	Black	Disk pack
3×120	4.5	61.7	925.5	308	361	0.15	0.34	Black	Disk pack
3×150	4.5	65.3	979.5	335	406	0.12	0.36	Black	Disk pack
3×185	4.5	69	1035	394	461	0.1	0.41	Black	Disk pack
3×240	4.5	74.1	1111.5	465	529	0.08	0.42	Black	Disk pack
3×300	4.5	79.1	1186.5	528	593	0.06	0.45	Black	Disk pack
3×400	4.5	89.1	1336.5	622	682	0.05	0.49	Black	Disk pack

● Instructions for ordering:
When ordering, the cable type, specification, length, delivery date, packing method and other necessary information shall be correctly marked.

Model	Specifications	Length	manner of packing	Delivery date	Place of delivery
YJV-8.7/10kV	1X250	300 m	Iron and wood plate	Effective until xx, 2017	1. Demander warehouse 2. Demander's Site 3. Self-promotion Note: The buyer specifies one

● For detailed product consultation, please inquire:

Domestic division	International division	● Mail support
Service hotline: 400-090-9966 Fax: 0755-6114-6789 Working hours: 09: 00 ~ 12: 00; 13：00～19：00 Rest days: 24/7	Tel: 0755-6114-5028 Fax: 0755-6113-7976 Working hours: 09:00~18:00 (Monday to Saturday) Rest days: weekends and national holidays	Dear users: If you have any comments or suggestions on our products, please contact us. E-mail: cttcable@hotmail.com We will reply to your information within 2 working days.

结构特性

● 导体: 铜导体，导体2类符合IEC60228

● 绝缘: XLPE 交联聚乙烯

● 护套:PVC

制造标准

● 国际标准 :IEC60502.1-2005

● 国家标准 :GB/T12706.1-2008

电气特性

● 额定电压Uo/U: 8.7/15（17.5）kV

● 最高工作电压: 8.7/15（17.5）kV

● 成品电缆交流耐压试验: 8.7/15（17.5）kV (5 min)

使用特性

● 导体最高温度:90°C

● 短路最高线芯温度(持续时间不超过5s):250°C。

● 运行温度范围: -20至90°C

● 电缆吊装使用专用吊装设备，严禁平吊线盘或直接从高空推卸电缆

安装特性

● 敷设最低环境温度:不应低于0°C

● 电缆的最小允许弯曲半径: 20 D (注：D为电缆实际外径)

● 最大容许拉力: 50 N

电缆安装时的最小弯曲半径

项目	单芯电缆		三芯及以上电缆
	无铠装	有铠装	无铠装	有铠装
安装时的电缆最小弯曲半径	20D	15D	15D	12D
靠近连接盒和终端的电缆最小弯曲半径(但弯曲要小心控制，如采用成型导板等)	15D	12D	12D	10D

Delivery length	transport
● Cables weighing less than 80kg are allowed to be delivered in loops. Each finished cable must be no less than 100m long or delivered by any length agreed by both parties. ● Allow delivery of any length according to the agreement	● The cable must be securely fastened during transportation to avoid damage to the cable or the disc caused by collision or overturning. ● Prevent serious bending and other mechanical damage to the cable tray. ● It is strictly forbidden to drop the cable tray with cables from the height during transportation. ● Cable hoisting uses special lifting equipment. It is strictly forbidden to lift the cable or directly drive the cable from high altitude.
Length error	Storage
● The length measurement error should not exceed ±0.5%	● The finished cable should be stored in an environment with a temperature between 0 and 40 ° C and a humidity of 85% or less. Do not expose it to direct sunlight or rain. Use proper ventilation to keep the environment dry.
package	Installation instructions
● The coiled or formed cable should be wound up neatly and properly packaged. Cable reels shall comply with the provisions of JB/T 8137-1999. ● The cable end should be reliably sealed. The cable end protruding from the outside of the disk should be covered with a protective cover. The extension length is less than 300mm. ● The cable package should bear a label indicating: a) Manufacturer's name and trademark b) Cable type and specifications c) rated voltage d) length (m) e) Weight (Kg) f) date of manufacture g) Standard number or certification mark h) Symbol of the correct rotation direction of the cable reel	● When installing, the ambient temperature should not be lower than 0 °C. If the temperature of the thermometer test environment is lower than 0 °C, the cable should be pre-heat treated before being installed. ● The bending radius during cable laying should be strictly controlled to avoid mechanical damage inside the cable. ● If a quality accident occurs in the cable laying process (such as damage to the outer sheath), it should be repaired immediately or notified to the after-sales service department of the company.