Copper core, XLPE insulated, PE sheathed power cable

YJV 6/10（12）kV

Structure: copper conductor/XLPE insulation/PVC outer sheath
Rated voltage: 6/10kv
Type：YJV22
To implement the standards Applicable Standards:
National standard: gb/t12706.1-2008
International Standard: International: IEC60502-1
Additional Standard: GB/T 19666-2005 General Rules for Flame Retardant and Refractory Cables
Scope of application: For transmission and distribution lines with 50 Hz AC rated voltage Uo/U of 0.6/1KV or less

产品描述
parameter
Specifications
Describe
Features
Others

- Commodity name: Copper core, XLPE insulated, PE sheathed power cable
YJV 6/10（12）kV

Structure: copper conductor/XLPE insulation/PVC outer sheath
Rated voltage: 6/10kv
Type：YJV22
To implement the standards Applicable Standards:
National standard: gb/t12706.1-2008
International Standard: International: IEC60502-1
Additional Standard: GB/T 19666-2005 General Rules for Flame Retardant and Refractory Cables
Scope of application: For transmission and distribution lines with 50 Hz AC rated voltage Uo/U of 0.6/1KV or less

● Specifications and approximate outer diameters of commonly used cables

6/ 10 (12) kV 1 cores XLPE Insulated, Copper conductor, screened, PVC sheathed

导体截面 No. of cores and nominal cross section	最高运行电压 Operation voltage max.	标称电压 Nominal voltage U0/U	绝缘厚度 Insulation thickness	近似外径 Outer Ø approx.	载流量（空气中） Current ratings in air 30℃	载流量（埋地）Current ratings buried 20℃	20℃最大直流电阻 maximum DC resistance at 20℃	护套颜色 Sheath color



mm²	kV	kV	mm	mm	A	A	Ω/km	—
1 x 35	12	6/10	3.4	20.6	205	190	0.52	Black
1 x 50	12	6/10	3.4	22	245	225	0.39	Black
1 x 70	12	6/10	3.4	23.6	305	275	0.27	Black
1 x 95	12	6/10	3.4	25.5	370	330	0.19	Black
1 x 120	12	6/10	3.4	26.9	430	375	0.15	Black
1 x 150	12	6/10	3.4	28.6	490	425	0.12	Black
1 x 185	12	6/10	3.4	30.3	560	480	0.1	Black
1 x 240	12	6/10	3.4	32.7	665	555	0.08	Black
1 x 300	12	6/10	3.4	35.3	765	630	0.06	Black
1 x 400	12	6/10	3.4	38.6	890	725	0.05	Black
1 x 500	12	6/10	3.4	42.2	1030	825	0.04	Black
1 x 630	12	6/10	3.4	45.9	1190	940	0.03	Black

6/ 10 (12) kV 3 cores XLPE Insulated, Copper conductor, screened, PVC sheathed

芯数 No. of cores	导体截面 nominal cross section	最高运行电压 Operation voltage max.	标称电压 Nominal voltage U0/U	绝缘厚度 Insulation thickness	护套厚度th thickness Nominal value	近似外径 Outer Ø approx.	载流量（空气中） Current ratings in air 30℃	载流量（埋地） Current ratings buried 20℃	20℃最大直流电阻 maximum DC resistance at 20℃	护套颜色 Sheath color



No.	mm	kV	kV	mm	mm	mm	A	A	Ω/km	—
3	50	12	6/10	3.4	2.4	44.4	169	216	0.39	Black
3	70	12	6/10	3.4	2.5	48.1	148	183	0.27	Black
3	95	12	6/10	3.4	2.7	52	178	218	0.19	Black
3	120	12	6/10	3.4	2.8	55.2	246	266	0.15	Black
3	150	12	6/10	3.4	2.9	58.7	267	318	0.12	Black
3	185	12	6/10	3.4	3	62.5	308	361	0.1	Black
3	240	12	6/10	3.4	3.1	67.6	335	406	0.08	Black

download Google:

When ordering, the cable type, specification, length, delivery date, packing method and other necessary information shall be correctly marked.

Model	Specifications	Length	manner of packing	Delivery date	Place of delivery
YJV-0.6/1kV	1X250	300 m	Iron and wood plate	Effective until xx, 2017	1. Demander warehouse 2. Demander's Site 3. Self-promotion Note: The buyer specifies one

● For detailed product consultation, please inquire:

Domestic division	International division	● Mail support
Service hotline: 400-090-9966 Fax: 0755-6114-6789 Working hours: 09: 00 ~ 12: 00; 13：00～19：00 Rest days: 24/7	Tel: 0755-6114-5028 Fax: 0755-6113-7976 Working hours: 09:00~18:00 (Monday to Saturday) Rest days: weekends and national holidays	Dear users: If you have any comments or suggestions on our products, please contact us. E-mail: cttcable@hotmail.com We will reply to your information within 2 working days.

Structural characteristics
● Conductor: copper conductor, type 2 conductor conforms to IEC60228
● Insulation: XLPE crosslinked polyethylene
● Sheath: PVC

Manufacturing standard
● International Standard: IEC60502.1-2005
● National standard: GB/T12706.1-2008

electrical specification
● Rated voltage Uo/U: 6/10(12)kV
● Maximum operating voltage: 6/10(12)kV
● AC withstand voltage test of finished cable: 6/10(12)kV (5 min)

operational performance
● Maximum conductor temperature: 90°C
● Short circuit maximum core temperature (duration not exceeding 5s): 250 C.
● Operating temperature range: -20 to 90°C
● Special hoisting equipment shall be used for cable hoisting. It is strictly prohibited to hoist the cable flat or directly push off the cable from high altitude.

Installation characteristics
● Minimum ambient temperature for laying: not lower than 0 C.
● Minimum allowable bending radius of the cable: 20 D (Note: D is the actual outer diameter of the cable)
● Maximum allowable pulling force: 50 N
Minimum bending radius for cable installation

Projects	single core cable		Three-core and above cables
	Unarmored	Armored	Unarmored	Armored
Minimum bending radius of cable during installation	20D	15D	15D	12D
Minimum bending radius of cables close to connection boxes and terminals (but bending shall be carefully controlled, such as forming guide plates, etc.)	15D	12D	12D	10D

Delivery length	transport
● Cables weighing less than 80kg are allowed to be delivered in loops. Each finished cable must be no less than 100m long or delivered by any length agreed by both parties. ● Allow delivery of any length according to the agreement	● The cable must be securely fastened during transportation to avoid damage to the cable or the disc caused by collision or overturning. ● Prevent serious bending and other mechanical damage to the cable tray. ● It is strictly forbidden to drop the cable tray with cables from the height during transportation. ● Cable hoisting uses special lifting equipment. It is strictly forbidden to lift the cable or directly drive the cable from high altitude.
Length error	Storage
● The length measurement error should not exceed ±0.5%	● The finished cable should be stored in an environment with a temperature between 0 and 40 ° C and a humidity of 85% or less. Do not expose it to direct sunlight or rain. Use proper ventilation to keep the environment dry.
package	Installation instructions
● The coiled or formed cable should be wound up neatly and properly packaged. Cable reels shall comply with the provisions of JB/T 8137-1999. ● The cable end should be reliably sealed. The cable end protruding from the outside of the disk should be covered with a protective cover. The extension length is less than 300mm. ● The cable package should bear a label indicating: a) Manufacturer's name and trademark b) Cable type and specifications c) rated voltage d) length (m) e) Weight (Kg) f) date of manufacture g) Standard number or certification mark h) Symbol of the correct rotation direction of the cable reel	● When installing, the ambient temperature should not be lower than 0 °C. If the temperature of the thermometer test environment is lower than 0 °C, the cable should be pre-heat treated before being installed. ● The bending radius during cable laying should be strictly controlled to avoid mechanical damage inside the cable. ● If a quality accident occurs in the cable laying process (such as damage to the outer sheath), it should be repaired immediately or notified to the after-sales service department of the company.